technical data sheet rpc-2.92 panel jack 02K421-271S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 1 rf_35/11.05/3.1 all dimensions are in mm; tole rances according to iso 2768 m-h interface mechanically compatible with rpc-3.50 and sma documents assembly instruction 02 a3 panel piercing b 55 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over chemical nickel outer contact stainless steel passivated dielectric ps solder sleeve brass gold, 0.1 m min.
technical data sheet rpc-2.92 panel jack 02K421-271S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/11.05/3.1 f(ghz) electrical data impedance 50 frequency dc to 40 ghz return loss 23 db, dc to 40 ghz insertion loss 0.04 x db insulation resistance 5 g center contact resistance 3.0 m outer contact resistance 2.0 m test voltage 750 v rms working voltage 250 v rms rf-leakage 100 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 center contact captivation 22 n coupling test torque 1.70 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, me thod 101, condition b vibration mil-std-202, me thod 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 2002/95/ec (rohs) compliant tooling n/a suitable cables ut 85 / rtk-fs 085 / rtk-flex 405 packing standard 1 pce in bag weight 13.3 g/pce draft date approved date rev. engineering change number name date herbert babinger 07/08/06 armin maiwaelder 07/08/06 a00 04-0130 herbert babinger 07/08/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
